Unfilled, Medium Viscosity, General Purpose Potting Resin
CC3-100 exhibits a wide variety of excellent features found only in the highest quality epoxy resins. It is a medium viscosity, unfilled, resilient, transparent epoxy which can be cured at room temperature or with heat.
Epoxy Glass Lamination: excellent wetting out properties
Thin Glue-Line Bonding: no bulky filler to occupy space
Void-Free, See Through Castings: medium viscosity, air released rapidly
H-1 Hardener: Rigid, good dimensional stability, fast cure.
H-7 Hardener: Resilient, excellent mechanical and thermal shock, low viscosity, good
air release, fast cure.
Ancamine Z: Resilient, excellent mechanical and thermal shock, plus high heat
distortion, long pot life.
H-10LV Hardener: Variable hardness, excellent impact properties, long pot life
ROOM TEMPERATURE CURE:
H-1 Hardener: Offers a working time of 30 minutes. Cures in 6 hours at 25’ C or 30 minutes at 65’ C.
Produces a tough, rigid resin with good dimensional stability. Do not heat cure
if the mass exceeds 100 grams.
H-7 Hardener: Offers a working time of 45 minutes. Cures in 24 hours at 25’ C or 2 hours at 65’ C.
Produces a tough, resilient resin with good mechanical and thermal shock properties.
H-10LV Hardener: Offers a working time of 3 hours. Cures in 24 hours at 25’ C or 3 hours at 65’ C.
Produces a variable hardness resin with excellent impact properties.
Ancamine Z: Offers a working time of 4 hours. Cures in 16 hours at 65’ C or 2 hours at 125’ C.
Produces a tough, resilient resin with good mechanical and thermal shock properties
plus a high heat distortion temperature of 125’ C.
Weigh out the desired amount of resin in a clean container. Add the hardener accurately by weight in the proper proportion as specified above. (ie. 14 grams of H-1 Hardener and 100 grams of CC3-100 for a total mix of 114 grams) Mix thoroughly. Use in a well ventilated area and avoid contact with eyes and skin.