metallic wire bonding


CC3-113

UNFILLED, LOW VISCOSITY, WATER CLEAR POTTING RESIN

CC3-113 exhibits a wide variety of excellent features found only in the highest quality epoxy resins. It is used in the textile industry for metallic wire bonding, and pin setting. It is used in the jewelry industry, when a clear, hard, tack-free surface is required and it is also used in the electronics industry to encase light emitting diodes. Both resin and hardener are low viscosity. CC3-113 can be cured at room temperature or with heat.

SUGGESTED APPLICATIONS

CC3-113 bonds well to a wide variety of materials, i.e., steel, copper, glass, aluminum, nylon, PVC, rubber and brass.

SURFACE PREPARATION

Be sure that all surfaces are free of grease. Use a good degreasing solution and be sure all oxides are removed. Abrading the surface will help provide a strong mechanical bond.

ELECTRICAL AND PHYSICAL PROPERTIES

  Specific Gravity: @ 25'C 1.24
  Viscosity: (centipoise) @ 25'C (mixed) 400-500
  Thermal Conductivity: BTU/ft-hr-'F/in 3.0
  Flexural Strength: psi 5,100
  Izod Impact: ft. lbs / in of notch 0.4
  Volume Resistivity: ohm-cm, @ 25'C 1.1 x 10
  Dielectric Strength: volts/mil 550
  Coefficient of Thermal Expansion: in/in/'C x 10 47
  Dielectric Constant: @ 25'C, 100 KC 3.11
  Dissipation Factor: 25'C, 100 KC 0.02
  Machinability Excellent
  Pot Life: 100 gram mass @ 25'C 60 mins.
  Service Temperature: 'C, continuous -70 - +150
  Standard Color CLEAR

 

 

BOND STRENGTH @ 25 ' C in psi

Steel to Steel 3,000
Alumlnum to Aluminum 3,300
Copper to Copper 1,500
Glass to Glass ****
Nylon to Nylon 1,200

 

MIXING INSTRUCTIONS

Mix CC3-113 thoroughly in its shipping container to insure a uniform consistency. Add 1 part CC3-113 Hardener to 2 parts CC3-113 Resin by weight or volume. Mix thoroughly. Cure at room temperature overnight.

Use in a well ventilated area and avoid contact with eyes and skin.

(508) 587-4502 FAX (508) 587-4514

354 WEST STREET W. BRIDGEWATER, MA 02379

Home

Product Summary

Technical Data Sheets

Evaluation Kits

Service

castcoat@aol.com